Matrix XR 2WD L4-1.8L (1ZZ-FE) (2003)
l.
4WD: Install the bolt and 2 nuts.
Torque: 52 Nm (530 kgf-cm, 38 ft. lbs.)
m. Install the stabilizer bar front and 4 bolts to the front suspension crossmember sub-assy.
Torque: 19 Nm (194 kgf-cm, 14 ft. lbs.)
12. INSTALL RACK & PINION POWER STEERING GEAR ASSY (LH (A/T) POSITION)
a. 2WD: Install the rack & pinion power steering gear assy with the 4 bolts.
Torque: 58 Nm (591 kgf-cm, 43 ft. lbs.)
b. 4WD: Install the rack & pinion power steering gear assy with the 2 bolts and 2 nuts.
Torque: 127 Nm (1,295 kgf-cm, 94 ft. lbs.)
13. INSTALL FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
a. Install the front suspension arm sub-assy lower No.1 LH with the 2 nuts and bolt to the lower ball joint assy front LH.
Torque: 89 Nm (908 kgf-cm, 66 ft. lbs.)
14. INSTALL FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 RH (LH (A/T) POSITION)
HINT: Install the RH side by the same procedures as the LH side.
15. INSTALL FRONT STABILIZER LINK ASSY LH (LH (A/T) POSITION)
16. INSTALL FRONT STABILIZER LINK ASSY RH (LH (A/T) POSITION)
HINT: Install the RH side by the same procedure as the LH side.
17. STABILIZE SUSPENSION
a. Install the front wheel and jack down the vehicle.
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
b. Bounce the vehicle up and down several times to stabilize the suspension.