Matrix XR 2WD L4-1.8L (1ZZ-FE) (2003)
![background image](/toyota/matrix_xr_2wd/l4-1.8l_(1zz-fe)/Page-659005.png)
NOTICE: Insert the cable securely.
k. 1ZZ-FE: Install the control cable with the clip to the bracket.
NOTICE: Insert the cable securely.
15. INSTALL AIR CLEANER ASSEMBLY WITH HOSE
Torque: 7.0 Nm (71 kgf-cm, 62 inch lbs.)
16. INSTALL FRONT FLOOR HEAT INSULATOR No. 1
a. Install the heat insulator with the 3 nuts.
Torque: 5.0 Nm (50 kgf-cm, 44 inch lbs.)
17. INSTALL EXHAUST PIPE ASSY FRONT
18. INSTALL FLOOR PANEL BRACE FRONT
a. Install the floor panel brace with the 2 nuts.
Torque: 29.6 Nm (302 kgf-cm, 22 ft. lbs.)
19. INSTALL OXYGEN SENSOR CONNECTOR
a. Connect the oxygen sensor connector.
b. Install the floor carpet and foot rest.
20. INSTALL AIR BAG SENSOR ASSY CENTER
SST 09249-63010
21. ADJUST SHIFT LEVER POSITION
22. INSPECT SHIFT LEVER POSITION
23. INSPECT SRS WARNING LIGHT