Matrix XR 2WD L4-1.8L (1ZZ-FE) (2003)
![background image](/toyota/matrix_xr_2wd/l4-1.8l_(1zz-fe)/Page-1410003.png)
6.
Remove Front Door Lower Frame Bracket Garnish.
7.
Remove Front Door Trim Board Sub-Assembly (see diagram for clip location).
8.
Remove Door Glass Window Run.
9.
Install New Door Glass Window Run.
10.
Reassemble in reverse order.
NOTE:
Please refer to the 2003 Matrix Repair Manual Vol. 2, pg. 75-5 for additional information.
Rear Door
Repair Procedure
If the Rear Door Glass Run is Deformed:
1.
Place window in down position.
2.
Remove Rear Door Window Regulator Handle Assembly (W/O Power Window).
A.
Using a shop rag, remove snap ring.
B.
Remove the rear door window regulator handle and plate.