Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-792003.png)
11. REMOVE PARKING BRAKE SHOE LEVER LH
a. Using a needle-nose pliers, disconnect the parking brake cable assy No.3 and remove the parking brake shoe lever LH.
12. APPLY HIGH TEMPERATURE GREASE
a. Apply the high temperature grease to the shoe attached surface of backing plate.
13. INSTALL PARKING BRAKE SHOE LEVER LH
a. Using a needle-nose pliers, connect the parking brake cable assy No.3 to the parking brake shoe lever LH.
14. INSTALL PARKING BRAKE SHOE ASSY LH NO.2
a. Apply the high temperature grease to the contact part of the parking brake shoe and parking brake shoe lever.
b. Using SST, install the parking brake shoe LH No.2 with the parking brake shoe hold-down compression spring and parking brake shoe