Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
Vacuum Brake Booster: Service and Repair
REPLACEMENT
1. DRAIN BRAKE FLUID
NOTICE: Wash the brake fluid off immediately if it comes into contact with any painted surface.
2. REMOVE AIR CLEANER CAP SUB-ASSY
3. REMOVE AIR CLEANER CASE SUB-ASSY
a. Remove the air cleaner element, then remove the 3 bolts and air cleaner case sub-assy.
4. REMOVE BRAKE MASTER CYLINDER SUB-ASSY
5. DISCONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS
a. Loosen the push rod clevis lock nut.
b. Remove the clip, clevis pin and wave washer.
6. REMOVE CRUISE CONTROL ACTUATOR ASSY (W/ CRUISE CONTROL)
a. Remove the 2 nuts and bolt from the cruise control actuator and bracket, and move cruise control actuator aside.
7. REMOVE FRONT WHEEL LH
8. REMOVE BRAKE BOOSTER ASSY
a. Using SST and spanner, disconnect the brake tube from the flexible hose, and remove the brake tube from the body
SST 09023-00100
b. Slide the clip, disconnect the vacuum hose from the brake booster assy.