Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-843005.png)
b. Check the pull-in coil for open circuit.
1. Using an ohmmeter, check that there is continuity between terminals 50 and C.
If there is no continuity, replace the repair service starter kit.
c. Check the hold-in coil for open circuit.
1. Using an ohmmeter, check that there is continuity between terminal 50 and the switch body.
If there is no continuity, replace the repair service kit.
11. INSTALL PLANET GEAR
a. Apply grease to the planetary gears and pin parts of the planetary shaft.
b. Install the 3 planetary gears.
c. Align the cutout of the plate with the protrusion inside the shock absorber.
12. INSTALL STARTER ARMATURE PLATE
a. Apply grease to the planetary gears and pin parts of the planetary shaft.
b. Align the cutout of the plate with the protrusion inside the shock absorber, and install the plate.