Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
HINT: Install it with the uneven surface facing up.
f.
Install the control cable with the 2 nuts to the body.
Torque: 12 Nm (122 kgf-cm, 9 ft. lbs.)
g. Connect the control cable to the control cable support.
h. Temporarily install the control cable to the control shaft lever with nut.
i.
2Z-GE: Install a new clip to the bracket.
j.
2Z-GE: Connect the control cable to the bracket.