Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
f.
Install the 17 bolts.
Torque: 10.8 Nm (110 kgf-cm, 8 ft. lbs.)
NOTICE:
^
Push the valve body against the accumulator piston spring and the check ball body to install it.
^
Tighten those bolts marked by * in the illustration first temporarily because they are positioning bolts.
Bolt length:
Bolt A: 25 mm (0.984 inch)
Bolt B: 41 mm (1.614 inch)
Bolt C: 45 mm (1.771 inch)
8. INSTALL VALVE BODY OIL STRAINER ASSY
a. Coat a new O-ring with ATF.
b. Install the O-ring to the oil strainer.
c. Install the oil strainer with the 3 bolts.
Torque: 10.8 Nm (110 kgf-cm, 8 ft. lbs.)
9. INSTALL TRANSMISSION WIRE
a. Coat an O-ring with ATF.
b. Install the ATF temperature sensor with the lock plate and bolt.
Torque: 6.6 Nm (67 kgf-cm, 58 inch lbs.)
c. Connect the 5 shift solenoid valve connectors.
10. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSY