Matrix XRS 2WD L4-18L (2ZZ-GE) (2003) Clutch Pedal Assembly Diagram
![background image](/toyota/matrix_xrs_2wd/l4-1.8l_(2zz-ge)/Page-667002.png)
3. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS W/HOLE PIN
a. Remove the clip and hole pin.
4. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSY
a. w/ Cruise control: Disconnect the clutch switch assy connector.
b. Disconnect the clutch start switch assy connector.
c. Remove the 2 nuts, bolt and clutch pedal support assy.
5. REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING (W/ TURN OVER)
a. Mount the clutch pedal in a soft jaw vise.
b. Using a screwdriver, remove the spring.
6. REMOVE CLUTCH PEDAL TURNOVER BUSH (W/ TURN OVER)
7. REMOVE CLUTCH PEDAL SUB-ASSY
a. Remove the bolt and nut.
b. Remove the clutch pedal sub-assy from the clutch pedal support.
8. REMOVE CLUTCH PEDAL PAD