Matrix XRS 2WD L4-1.8L (2ZZ-GE) (2003)
/Page-673003.png)
10. INSPECT CLUTCH COVER ASSY
a. Using vernier calipers, inspect the diaphragm spring for depth and width of wear.
Minimum:
A (Depth): 0.5 mm (0.020 inch)
B (Width): 6.0 mm (0.236 inch)
If necessary, replace clutch cover assy.
11. INSPECT FLYWHEEL SUB-ASSY
a. Using a dial indicator, inspect the flywheel assy run out.
Maximum runout: 0.1 mm (0.004 inch)
If necessary, replace the flywheel sub-assy.
12. INSPECT CLUTCH RELEASE BEARING ASSY
a. Turn the release bearing by hand while applying force in the axial direction.
HINT: The bearing is permanently lubricated and requires no cleaning or lubrication.
If necessary, replace the release bearing assy.
13. INSTALL CLUTCH DISC ASSY
a. Insert SST in the clutch disc assy, then insert them in the flywheel sub-assy.
SST 09301-00210
NOTICE: Take care not to insert clutch disc assy in the wrong direction.