MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
MEASURE PLANETARY PINION GEAR THRUST CLEARANCE
Using a feeler gauge, measure the planetary pinion gear thrust clearance.
Standard clearance: 0.2 - 0.5 mm (0.008 - 0.020 in.)
Maximum clearance: 0.5 mm (0.020 in.)
If the clearance is greater than the maximum, replace the planetary gear assembly.
INSPECTION OF PLANETARY RING GEAR
1. INSPECT RING GEAR FLANGE BUSHING
Using a dial indicator, measure the inside diameter of the flange bushing.
Standard inside diameter: 19.025 - 19.050 mm (0.7490 - 0.7500 in.)
Maximum inside diameter: 19.100 mm (0.7520 in.)
If the inside diameter is greater than the maximum, replace the flange.
2. REMOVE RING GEAR FLANGE
a. Using a screwdriver, remove the snap ring.
b. Remove the flange from the ring gear.