MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
c. Using a screwdriver and hammer, drive out the oil seal.
d. Using SST, brass bar and hammer, remove the taper roller bearing outer race.
SST 09612-65014 (09612-01020)
e. Using SST and a hammer, install the taper roller bearing.
SST 09316-60010 (09316-00010, 09316-00040)
f.
Using SST and a hammer, drive in a new oil seal.
SST 09316-60010 (09316-00010)
g. Coat the lip of oil seal with MP grease.