MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
(c) Install the two anti-squeal shims to each pad.
(d) Install inside pad with the pad wear indicator plate facing downward.
(e) Install outside pad.
NOTICE: There should be no oil or grease adhering to the friction surfaces of the pads or the rotor/disc.
(f) Install the two anti-squeal springs.
8. Install Cylinder
(a) Draw out a small amount of brake fluid from the reservoir tank.
(b) Press in the piston with with a hammer handle or an equivalent.