MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
Required SSTs
Radiator Cap Identification Procedure
1.
Use the illustration below to identify the vehicle's radiator cap type and kPa rating.
2.
Proceed to the required inspection procedure for the radiator cap and kPa rating.
Radiator Cap Inspection Procedure
Type: N-cap, 88 kPa
1.
Remove coolant and any foreign material on rubber points "A," "B," and "C."
2.
Check that points "A," "B," and "C" are not deformed, cracked, or swollen.
3.
Check that points "C" and "D" are not stuck together.
4.
Apply engine coolant to points "B" and "C" before using the radiator cap tester.
^
Radiator Cap Tester:
Snap-On/Sun P/N SVTS262A
(or equivalent)