MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
Three Way Catalytic Converter: Service and Repair
Sub Converter
Tail Pipe Bracket
1.
Remove two bolts holding front exhaust pipe to tailpipe bracket.
2.
Remove two bolts holding front exhaust pipe to tailpipe and remove the gasket.
Support Bracket
3.
Remove two bolts and support bracket.
4.
Remove three nuts and front exhaust pipe.
Front Exhaust Pipe
1.
Place new gasket on front of front exhaust pipe. Install pipe and tighten three new nuts.
Torque Value:
46 ft.lb (62 Nm)
Support Bracket
2.
Install support bracket with two bolts.