MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
-
When placing a new 0-ring on the injector, take car not to damage it in any way.
-
Coat a new 0-ring with spindle oil or gasoline before installing-never use engine, gear or brake oil.
-
Install the injector to delivery pipe and cylinder head as shown in the illustration.
1. INSTALL INJECTORS AND DELIVERY PIPE.
-
Install a new grommet to the injector.
-
Apply a light coat of gasoline to a new 0-ring and install it to the injector.
-
While turning the injector left and right, install it to the delivery pipes. Install the 4 injectors.
-
Position the injector connector upward.
-
Place 4 new insulators and the 2 spacers in position on the cylinder head.
-
Place the 4 injectors and delivery pipe assembly in position on the cylinder head.