MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
/Page-574002.png)
2. REMOVE THRUST WASHER FROM STATOR SHAFT BACK SIDE
3. REMOVE STATOR SHAFT
Remove the eleven bolts and stator shaft. Keep the gears in assembly order.
4. REMOVE FRONT OIL SEAL
Pry off the oil seal with a screwdriver.
INSPECTION OF OIL PUMP
1. CHECK BODY CLEARANCE OF DRIVEN GEAR
Push the driven gear to one side of the body.
Using a feeler gauge, measure the clearance.
Standard body clearance: 0.07 - 0.15 mm (0.0028 - 0.0059 in.)
