MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
a. Position the flange into the ring gear.
b. Using a screwdriver, install the snap ring.
INSPECTION OF REAR PLANETARY GEAR
MEASURE PLANETARY PINION GEAR THRUST CLEARANCE
Using a feeler gauge, measure the planetary pinion gear thrust clearance.
Standard clearance: 0.2 - 0.5 mm (0.008 - 0.020 in.)
Maximum clearance: 0.5 mm (0.020 in.)
If the clearance is greater than maximum, replace the planetary gear assembly.