MR2 L4-1587cc 1.6L DOHC SC (4A-GZE) (1988)
/Page-476011.png)
If the preload is not within specification, remove the differential from the transaxle case.
Re-select LH adjusting shim.
NOTE: The preload will change about 3 - 4 kg.cm. (2.6 - 3.5 in.lb, 0.3 - 0.4 N.m) with each shim thickness.
5. REMOVE DIFFERENTIAL
a. Remove the transaxle housing.
b. Remove the differential from the transaxle case.
6. INSTALL RING GEAR TO DIFFERENTIAL CASE
INSTALLATION OF DIFFERENTIAL
1. INSTALL DIFFERENTIAL
2. INSTALL TRANSAXLE HOUSING
