MR2 L4-1587cc 1.6L DOHC SC (4A-GZE) (1988)
/Page-500002.png)
b. Remove the torque converter.
4. MEASURE DRIVE PLATE RUNOUT AND INSPECT RING GEAR
Set up a dial indicator and measure the drive plate runout. If runout exceeds 0.20 mm (0.0079 in.) or if the ring gear is damaged, replace the drive
plate. If installing a new drive plate, note the orientation of the spacers and tighten the bolts.
Torque: 650 kg.cm. (47 ft.lb., 64 N.m)
Runout: 0.20 mm (0.0079 in.) or less
