MR2 L4-1587cc 1.6L DOHC SC (4A-GZE) (1988)
10. REMOVE VALVE BODY
a. Remove the twelve bolts.
b. Disconnect the throttle cable from the cam.
c. Disconnect the manual valve connecting rod and remove the valve body.
11. REMOVE SECOND BRAKE APPLY GASKET
INSTALLATION OF VALVE BODY
1. INSTALL SECOND BRAKE APPLY GASKET
2. PLACE VALVE BODY ON TRANSMISSION
a. Connect the manual valve connecting rod.
b. While holding the cam down with your hand, slip the cable end into the slot.
c. Bring valve body into place.
CAUTION: Be careful not to entangle the solenoid wire.