MR2 L4-1587cc 1.6L DOHC SC (4A-GZE) (1988)
Clutch Pedal Assembly: Adjustments
Fig. 1 Clutch Pedal Adjustments
1.
Refer to Fig. 3 and check clutch pedal height, which should measure 6.03-6.41 inches on 1985-87 models or 6.18-6.57 inches on 1988 models. If
specified clutch pedal height cannot be obtained, remove instrument panel lower trim panel and air duct, loosen locknut and turn adjusting bolt
until specified clutch pedal height is obtained.
2.
After correct clutch pedal height is obtained, tighten locknut.
3.
Refer to Fig. 3 and check pedal freeplay. Depress clutch pedal until clutch resistance is obtained, then check freeplay, which should measure
.20-.59 inch.
4.
Check clutch cylinder pushrod play at top of pedal. Play should be .039-.197 inch.