MR2 L4-1587cc 1.6L DOHC SC (4A-GZE) (1988)
10. INSTALL DIFFERENTIAL CASE ASSEMBLY
Install the differential case assembly to the transaxle case.
11. INSTALL OUTPUT SHAFT ASSEMBLY
Lift up the differential case, install the input shaft assembly.
12. INSTALL TRANSMISSION CASE
a. Install the transmission case.
NOTE: If necessary, tap on the case with a plastic hammer.
b. Install and torque the seventeen bolts.
Torque: 300 kg-cm (22 ft-lb. 29 N-m)
13. INSTALL OUTPUT SHAFT REAR TAPER ROLLER BEARING OUTER RACE