MR2 L4-1587cc 1.6L DOHC SC (4A-GZE) (1988)
Wiper Motor: Service and Repair
1.
With wiper arms in ``Up'' position and wiper switch on ``Low,'' turn ignition switch ``Off.''
2.
Disconnect battery ground cable.
3.
Disconnect wiper motor electrical connector, then remove light retractor relay from wiper bracket.
4.
Remove wiper motor attaching bolts. Manually lower wiper arms, then hook wiper link hook to dash panel service hole.
5.
Disconnect wiper motor from wiper link.
6.
Remove wiper motor.
7.
Reverse procedure to install.