toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal and Replacement|Page 4432 > < Removal and Replacement|Page 4430
Page 9
background image

Install the upper luggage compartment garnish with the 6 clips.

14. INSTALL PULL HANDLE

a. Install pull handle with the 2 screws.
b. Install the cover.

15. INSTALL WIND DEFLECTOR BOARD

a. Install the deflector board with the 4 nuts.
b. Install the window deflector cover.

16. CONNECT FRONT SEAT OUTER BELTS

Connect the front seat outer belt with the shoulder anchor mounting bolt.

Torque: 42 N.m (420 kgf.cm, 30 ft.lbf) 

17. INSTALL LUGGAGE COMPARTMENT BOXES
18. INSTALL QUARTER TRIM PANELS
19. CONNECT FRONT SEAT OUTER BELTS

Connect the front seat outer belt with the floor anchor mounting bolt.

Torque: 42 N.m (420 kgf.cm, 30 ft.lbf) 

20. INSTALL LOWER REAR NO.1 SEPARATOR TRIM COVERS
21. INSTALL LUGGAGE COMPARTMENT LIDS
22. INSTALL FRONT SCUFF PLATES
23. INSPECT WATER LEAKAGE
24. INSPECT TARPAULIN COVER FOR PROPER TENSION AND ALIGNMENT

Removal and Replacement|Page 4432 > < Removal and Replacement|Page 4430