MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
![background image](/toyota/mr2_spyder/l4-1.8l_(1zz-fe)/Page-738008.png)
4. INSTALL PARKING BRAKE CRANK BOOT
a. Using SST and a hammer, tap in new parking brake crank boot shown in the illustration.
SST 09612-22011
b. Confirm that the metal plate portion of the parking brake crank boot fits snugly in the caliper.
5. INSTALL PARKING BRAKE CRANK
a. Check that the needle roller bearing is not covering the cylinder hole.
b. Install the parking brake crank in the caliper.
c. Check that there is clearance between the parking brake crank and caliper.
Standard clearance: 0.38 - 1.02 mm (0.0150 - 0.0416 inch)
6. INSTALL TORSION SPRING
Using a small screwdriver, install the torsion spring.
7. INSTALL NEW O-ring TO ADJUSTING BOLT
8. INSTALL ADJUSTING BOLT ASSEMBLY