MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
/Page-741004.png)
c. Temporarily install the cylinder on the torque plate with bottom side installation bolt.
d. Hold the sliding pin and torque the installation bolt.
Torque: 34 Nm (350 kgf-cm, 25 ft. lbs.)
11. CONNECT FLEXIBLE HOSE FROM SHOCK ABSORBER
Connect the brake hose and install the bolt.
Torque: 29 Nm (296 kgf-cm, 21 ft. lbs.)
12. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
13. DEPRESS BRAKE PEDAL SEVERAL TIMES
14. CHECK THAT FLUID LEVEL IS AT MAX LINE