MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
![background image](/toyota/mr2_spyder/l4-1.8l_(1zz-fe)/Page-752002.png)
7. INSPECT BATTERY POSITIVE VOLTAGE
Battery positive voltage: 10 - 14 V
8. DISCONNECT CONNECTORS
Disconnect the 2 connectors from the actuator.
9. CONNECT ACTUATOR CHECKER (SST)
a. Connect the actuator checker (SST) to the actuator side wire harness via the sub-wire harness (SST).
SST 09990-00150, 09990-00250, 09990-00300, 09990-00360
b. Connect the red cable of the checker to the battery positive (+) terminal and black cable to the negative (-) terminal.
Connect the black cable of the sub-wire harness to the battery negative (-) terminal or body ground.
10. INSPECT ABS ACTUATOR OPERATION OF REAR LH WHEEL
HINT: The functions of the ABS actuator checker switches are shown in the table.
a. Start the engine and run it at idle.