MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
b. Remove the No. 1 cooling fan relay. (Marking: FAN No. 1)
c. Inspect the No. 1 cooling fan relay continuity.
1) Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
2) Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.
d. Inspect the No. 1 cooling fan relay operation.
1) Apply battery positive voltage to terminals 1 and 2.
2) Using an ohmmeter, check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.
e. Reinstall the No. 1 cooling fan relay.
f.
Reinstall the R/B No. 4 cover.
2. INSPECT NO. 2 AND NO. 3 COOLING FAN RELAY