MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
![background image](/toyota/mr2_spyder/l4-1.8l_(1zz-fe)/Page-285002.png)
c. Check only the valves indicated as shown.
Measure the valve clearance (See step (a)).
4. ADJUST VALVE CLEARANCE
a. Set the No. 1 cylinder to the TDC compression (See step 2).
b. Place matchmarks on the timing chain and camshaft timing sprockets.
c. Remove the 2 nuts and chain tensioner.
d. Remove the 2 camshaft and timing sprocket assemblies.
1) Remove the 19 bolts and 9 camshaft bearing caps.
2) Remove the 2 camshaft and timing sprocket assemblies.