MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
a. Install the rotor.
b. Using SST, install the snap ring.
SST 95994-10020
NOTE: The snap ring should be installed so that beveled side faces up.
3. INSTALL PRESSURE PLATE
a. Install the shims to the pressure plate and install the pressure plate on the rotor.
b. Using SST and a torque wrench, install the shaft bolt.
SST 07112-66040, 07112-76060
Torque: 13.2 N.m (135 kgf.cm, 10 ft.lbf)