MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
Control Assembly: Testing and Inspection
On-Vehicle Inspection
AIR CONDITIONING CONTROL SYSTEM
ON-VEHICLE INSPECTION
1. DISCONNECT COMBINATION MATER
2. DISCONNECT ECM
3. INSPECT A/C CONDITIONING CONTROL SYSTEM CIRCUIT
Combination Meter (Wire Harness Side)
a. Disconnect the connector from the combination meter and inspect the connector on the wire harness side, as shown in the diagram.
Test condition:
Turn ignition switch to ON
If the circuit is not as specified, inspect the circuits connected to other parts.