MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
2. Release the vacuum from the vapor pressure sensor.
Voltage: 3.0 - 3.6 V
3. Apply pressure (1.5 kPa (15 gf/sq.cm, 0.22 psi)) to the vapor pressure sensor.
Voltage: 4.2 - 4.8 V
d. Turn the ignition switch OFF.
6. REINSTALL VAPOR PRESSURE SENSOR
a. Reinstall the vapor pressure sensor and clip.
b. Reconnect the vapor pressure sensor connector.
c. Reinstall the 2 bolts and No.3 fuel tank protector.
7. REINSTALL FLOOR SERVICE HOLE COVER
8. REINSTALL LUGGAGE COMPARTMENT BOX