MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
Part No.23901-22070
d. Connect SST (hose) and fuel tube connector to the fuel pipe.
SST 09268-41047 (90467-13001 95336-08070)
CAUTION: Connect the fuel tube connector (quick type) observing the precautions.
e. Connect SST (hose) to the injector.
SST 09268-41407 (90467-13001, 95336-08070)
f.
Put the injector into a graduated cylinder.
CAUTION: Install a suitable vinyl hose onto the injector to prevent gasoline from splashing out.
g. Connect a TOYOTA hand-held tester to the DLC3.
1. Connect the TOYOTA hand-held tester to the DLC3.
2. Connect the battery negative (-) terminal cable to the battery.
3. Turn the ignition switch ON and push the TOYOTA hand-held tester main switch ON.
NOTE: Do not start the engine.
4. Select the ACTIVE TEST mode on the TOYOTA hand-held tester.
5. Please refer to the TOYOTA hand-held tester operator's manual for further details.
If you have no TOYOTA hand-held tester, connect the positive (+) and negative (-) leads from the battery to the fuel pump connector.