MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
![background image](/toyota/mr2_spyder/l4-1.8l_(1zz-fe)/Page-637002.png)
6. REMOVE THROTTLE BODY
a. Disconnect the throttle position sensor connector.
b. Disconnect the IAC valve connector.
c. Disconnect the PCV hose from the throttle body.
d. Disconnect the 2 water bypass hoses from the throttle body.
e. Remove the 2 bolts, 2 nuts, throttle body and 2 gaskets from the intake manifold.
f.
Remove the 2 bolts and accelerator cable bracket from the throttle body.
INSTALLATION
1. INSTALL THROTTLE BODY
a. Install 2 new gaskets to the intake manifold as shown in the illustration.
b. Install the accelerator cable bracket to the throttle body with the 2 bolts.