MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
/Page-652001.png)
Ignition Relay: Testing and Inspection
IGNITION RELAY (No.1)
INSPECTION
1. REMOVE IGNITION RELAY (Marking: IG1) FROM R/B No.3
2. INSPECT IGNITION RELAY
a. Inspect the relay continuity.
1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
2. Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.
b. Inspect the relay operation.