MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
Crankshaft Position Sensor: Testing and Inspection
ON-VEHICLE INSPECTION
NOTE: "Cold" and "Hot" in these sentences express the temperature of the coils themselves "Cold" is from -10 °C (14 °F) to 50 °C (122 °F) and "Hot"
is from 50 °C (122 °F) to 100 °C (212 °F).
INSPECT CRANKSHAFT POSITION SENSOR
a. Remove the front engine under cover.
b. Disconnect the NC compressor.
c. Disconnect the connector from the oil level gauge clamp.
d. Using an ohmmeter, measure the resistance between the terminals.
If the resistance is not as specified, replace the sensor.
e. Reinstall the connector with the oil level gauge clamp.
f.
Reconnect the A/C compressor.
g. Reinstall the front engine under cover.