MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
6. Install the fuel pipe clamp to the connector.
7. Check if there is any fuel leak.
f.
Observe these precautions when disconnecting the fuel tube connector (metallic type):
HINT: The structure of the metallic connector is shown.
1. Check that there is any dirt like mud in the pipe and around the connector before disconnecting them and remove the dirt if any.
2. Assemble SST to the connection as shown in the illustration.
SST 09268-21010
3. Turn the SST, align the retainers inside the connector with the SST chamfered parts and insert the SST into the connector.