MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
4. REMOVE NO.3 COOLING FAN (Marking: FAN NO.3) RELAY FROM R/B NO.4
5. INSPECT NO.3 COOLING FAN RELAY
a. Inspect the relay continuity.
1. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
2. Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.
b. Inspect the relay operation.
1. Apply battery positive voltage across terminals 1 and 2.
2. Using an ohmmeter, check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.
6. REINSTALL NO.3 COOLING FAN RELAY
INSPECTION
1. INSPECT NO. 1 COOLING FAN RELAY
a. Remove the R/B No. 4 cover.