MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
Airbag Sensor Assembly: Testing and Inspection
Airbag Sensor Assembly
Collision / Non-Collision Inspections
VEHICLE NOT INVOLVED IN COLLISION
Check a diagnostic system.
VEHICLE INVOLVED IN COLLISION WITH AIRBAG NOT DEPLOYED
Check a diagnostic system. *
VEHICLE INVOLVED IN COLLISION WITH AIRBAG DEPLOYED
Replace the airbag sensor assembly. *
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Displaying & Reading Trouble Codes
Replacement Requirements
REPLACEMENT REQUIREMENTS
In the following cases, replace the airbag sensor assembly.
-
If the SRS has been deployed in a collision.
-
If the airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the airbag sensor assembly has been dropped.
CAUTION: For removal and installation of the airbag sensor assembly. Be sure to follow the correct procedure.