MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
Air Bag Deactivation Switch: Testing and Inspection
PASSENGER AIRBAG MANUAL ON-OFF SWITCH INSPECTION
HINT: Release the airbag activation prevention mechanism of the passenger airbag manual on-off switch connector on the airbag sensor assembly side.
1. REMOVE PASSENGER AIRBAG MANUAL ON-OFF SWITCH
a. Remove the glove compartment door.
b. Remove the 2 bolts and passenger airbag manual on-off switch, and disconnect the switch connectors.
2. INSPECT PASSENGER AIRBAG MANUAL ON-OFF SWITCH CONTINUITY
Using an ohmmeter, measure the continuity and resistance between each terminal.
If continuity is not as specified, replace the switch.
3. REINSTALL PASSENGER AIRBAG MANUAL ON-OFF SWITCH
a. Install the passenger airbag manual on-off switch with the 2 bolts and connect the switch connector.
b. Install the glove compartment door.