MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
-
Never repair a sensor in order to reuse it.
1. REMOVE LUGGAGE COMPARTMENT TRIM BOX COVER
2. REMOVE TOOL BOX ASSEMBLY
3. LH
REMOVE FRONT AIRBAG SENSOR
a. Disconnect the connector.
NOTE: Disconnect the connector with sensor assembly installed.
b. Remove the 2 bolts and front airbag sensor LH.
4. RH
REMOVE FRONT AIRBAG SENSOR
a. Disconnect the connector.
NOTE: Disconnect the connector with sensor assembly installed.
b. Remove the 2 bolts and front airbag sensor RH.
INSTALLATION