MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
![background image](/toyota/mr2_spyder/l4-1.8l_(1zz-fe)/Page-887005.png)
a. Using SST, compress the coil spring.
SST 09727-30021 (09727-00010, 09727-00021, 09727-00031)
NOTICE: Do not use an impact wrench. It will damage the SST.
b. Insert the coil spring to the shock absorber.
HINT: Fit the lower end of the coil spring into the gap of the spring lower seat.
2. INSTALL SPRING BUMPER
3. INSTALL SUSPENSION SUPPORT
a. Position the suspension support.
HINT: Align the piston rod notch and the suspension support hole.
b. Temporarily install the collar and a new center nut.
c. Align the suspension support with the shock absorber lower bracket, as shown.
d. Hold the suspension support in a vise.
e. Tighten the center nut.
Torque: 73 Nm (745 kgf-cm, 54 ft. lbs.)
f.
Remove the SST.
SST 09727-30021 (09727-00010, 09727-00021, 09727-00031)
g. Recheck the direction of the spring bracket.