Front Wheel Bearing Service and Repair for MR2 Spyder (1ZZ-FE)
b. Using SST and a press, remove the inner race (outside) from the axle hub.
SST 09950-00020, 09950-60010 (09951-00380), 09950-70010 (09951-07150)
2. REMOVE DUST COVER
Remove the 3 bolts and dust cover.
3. REMOVE BEARING FROM AXLE CARRIER
a. Using snap ring pliers, remove the snap ring.
b. Place the inner race on the outside of the bearing.
c. Using SST and a press, remove the bearing.
SST 09310-35010, 09527-17011
REASSEMBLY
1. INSTALL BEARING
a. Using SST and a press, install a new bearing to the axle carrier.
SST 09950-60020 (09951-00730), 09950-70010 (09951-07150)
b. Using snap ring pliers, install a new snap ring.
2. INSTALL DUST COVER
Install the dust cover with the 3 bolts.
Torque: 8.3 Nm (85 kgf-cm, 74 inch lbs.)
3. INSTALL AXLE HUB