Paseo L4-1497cc 1.5L DOHC (5E-FE) (1992)
/Page-227002.png)
(a) Align the pulley and oil pump drive shaft.
(b) Using SST to hold the pulley. torque the nut.
SST 09616-12011
Torque: 36 N.m (370 kgf.cm. 27 ft.lbf)
2. INSTALL CAMSHAFT TIMING PULLEY
(a) Align the camshaft knock pin with the knock pin groove of the pulley slide on the pulley.
(b) Temporary install the timing pulley bolt.
(c) Hold the hexagonal wrench head portion of the cam shaft with a wrench. and tighten the timing pulley bolt.
Torque: 50 N.m (510 kgf.cm, 37 ft.lbf)
3. INSTALL CRANKSHAFT TIMING PULLEY
(a) Align the pulley set key with the key groove of the pulley.
(b) Slide on the timing pulley, facing the flange side inward.
(c) Using the crankshaft pulley bolt, turn the crankshaft and align the timing marks of the crankshaft timing pulley and oil pump body.