Paseo L4-1497cc 1.5L DOHC (5E-FE) (1992)
EGR Control Solenoid: Testing and Inspection
EGR Vacuum Switching Valve (VSV) CA Only
VSV Circuit
VSV Inspection - Checking Resistance
Inspect VSV For Open Circuit
- Using an ohmmeter, check that there is continuity between the terminals.
Resistance (Cold): 37 - 44 ohms at 2O°C (68°F)
- If there is no continuity, replace the VSV.
VSV Inspection - Checking For Short
Inspect VSV For Ground
- Using an ohmmeter, check that there is no continuity between each terminal and the body.
- If there is continuity, replace the VSV.
VSV Inspection - Checking Operation
Inspect VSV Operation