Paseo L4-1497cc 1.5L DOHC (5E-FE) (1992)
![background image](/toyota/paseo/l4-1497cc_1.5l_dohc_(5e-fe)/Page-298001.png)
Circuit Opening Relay: Testing and Inspection
Circuit Opening Relay Removal
Circuit Opening Relay Inspection
Inspect Relay Continuity
- Using an ohmmeter, check that there is continuity between terminals STA and E1.
- Check that there is continuity between terminals +B and FC.
- Check that there is no continuity between terminals +B and FP.
- If continuity is not as specified, replace the relay.
Circuit Opening Relay Inspection
Inspect Relay Operation
- Apply battery voltage across terminals STA and E1. Using an ohmmeter, check that there is continuity between terminals +B and FP.