Paseo L4-1497cc 1.5L DOHC (5E-FE) (1992)
/Page-319001.png)
Manifold Pressure/Vacuum Sensor: Testing and Inspection
Vacuum Sensor Circuit
Vacuum Sensor Inspection - Power Source
Inspect Power Source Voltage Of Vacuum Sensor
- Disconnect the vacuum sensor connector.
- Turn the ignition switch ON.
- Using a voltmeter, measure the voltage between terminals VCC and E2 of the vacuum sensor connector.
Voltage: 4-6V
- Reconnect the vacuum sensor connector.
Vacuum Sensor Inspection - Signal Output