Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Crankshaft: Specifications
SERVICE SPECIFICATIONS
Thrust Clearance
STD ............................................................................................................................................................. 0.020 - 0.200 mm (0.0008 - 0.0078 inch)
Maximum ................................................................................................................................................................................. 0.30 mm (0.0118 inch)
Thrust Washer Thickness
STD ............................................................................................................................................................. 2.430 - 2.480 mm (0.0957 - 0.0976 inch)
O/S 0.125 .................................................................................................................................................... 2.493 - 2.543 mm (0.0981 - 0.1001 inch)
Main Journal Oil Clearance
STD ............................................................................................................................................................. 0.016 - 0.035 mm (0.0006 - 0.0014 inch)
U/S 0.25 ...................................................................................................................................................... 0.015 - 0.055 mm (0.0006 - 0.0022 inch)
Maximum ................................................................................................................................................................................. 0.08 mm (0.0031 inch)
Main Journal Diameter
STD ......................................................................................................................................................... 49.985 - 50.000 mm (1.9679 - 1.9685 inch)
U/S 0.25 .................................................................................................................................................. 49.745 - 49.755 mm (1.9585 - 1.9589 inch)
Main journal bore diameter (Reference)
Mark 1 ..................................................................................................................................................... 54.018 - 54.024 mm (2.1267 - 2.1269 inch)
Mark 2 ...................................................................................................................................................... 54.025 -54.030 mm (2.1270 - 2.1272 inch)
Mark 3 ..................................................................................................................................................... 54.031 - 54.036 mm (2.1272 - 2.1274 inch)
Main Journal Diameter (Reference)
Mark O .................................................................................................................................................... 49.996 - 50.000 mm (1.9683 - 1.9685 inch)
Mark 1 ..................................................................................................................................................... 49.991 - 49.995 mm (1.9081 - 1.9683 inch)
Mark 2 ..................................................................................................................................................... 49 985 - 49.990 mm (1.9679 - 1.9681 inch)
Crank Pin Diameter
STD ......................................................................................................................................................... 42.985 - 43.000 mm (1.6923 - 1.6929 inch)
U/S 0.25 .................................................................................................................................................. 42.745 - 42.755 mm (1.6829 - 1.6833 inch)
Circle Runout
Maximum ................................................................................................................................................................................. 0.06 mm (0.0024 inch)
Main Journal Taper and Out-of-Round
Maximum ................................................................................................................................................................................. 0.08 mm (0.0031 inch)
Crank Pin Taper and Out-of-Round
Maximum ................................................................................................................................................................................. 0.07 mm (0.0028 inch)
TIGHTENING SPECIFICATIONS
Crankshaft Pulley to Crankshaft .................................................................................................................................. 155 Nm (1,550 kg.cm, 112 ft. lbs.)