Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
Knock Sensor: Component Tests and General Diagnostics
KNOCK SENSOR INSPECTION
1. Remove knock sensor.
(a) Disconnect the knock sensor connector.
(b) Using SST, remove the knock sensor. SST 09816-30010
2. Inspect knock sensor.
Using an ohmmeter, check that there is no continuity between the terminal and body.
If there is continuity. replace the sensor.
3. Reinstall knock sensor.
Torque: 45 N.m (450 kgf.cm. 33 ft.lbf)